Huawei applies for a Type-C interface anti-corrosion patent
Recently, a Huawei patent with the title “A method for preventing corrosion of terminals and Type C interfaces” appeared online. The patent provides a method for preventing corrosion of terminals and Type C interfaces.
The patent abstract shows that the solution from Huawei provides an anti-corrosion method for the terminals and Type C interface. This method is used to reduce the probability of electrochemical corrosion between the CC pin and other pins in the Type C interface.
In the terminal, the processor connects to the motion sensor and the interface chip. Also, the interface chip connects to the processor and the CC pin in the Type C interface. The motion sensor will then detect when there is motion in the terminal. Depending on the motion state of the terminal, the control interface chip configures the CC pin of the Type C interface to a low-level mode.
If the motion sensor detects a motion – static movement, it reflects that the terminal is disconnected from the external device. In this case, configuring the CC pin to low-level mode can reduce the effective level of the CC pin. This in turn reduces the chance of galvanic corrosion between the CC pin and the other pins.
From the above summary, the motion sensor plays an important role, which can detect whether the terminal is disconnected from the external device. Of course, this is only a patent. Just like millions of other patents, this one may never hit the road. It is impossible to determine whether or when it will go commercial.